Description:
General Information
Manufacturer: Schneider Electric SA
Manufacturer Part Number: AP8441
Brand Name: APC by Schneider Electric
Product Line: Metered
Product Name: Metered-by-Outlet Rack PDU
Marketing Information:
APC Metered by Outlet Rack Power Distribution Units (PDUs) provide individual outlet power metering to enable energy optimization and circuit protection Current metering provides real-time remote monitoring of connected loads Metered by Outlet Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership Metered by Outlet Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers Users can access and configure Metered by Outlet Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency
Product Type: PDU
Technical Information
PDU Type: Metered-by-Outlet
Plug/Connector Type: NEMA L6-30P
Plug/Connector Detail: 1 x NEMA L6-30P
Receptacle Type: IEC 60309 C13IEC 60309 C19Power Description
Input Voltage: 200 V208 V230 VOutput Voltage: 200 V AC208 V ACInput Current: 30 A
Physical Characteristics
Mounting Orientation: Vertical
Mount Type: Rack-mountable
Placement: Side
Rack Height: 0U
Cord Length: 10 ft (3.05 m)
Height: 72.01" (1829 mm)
Width: 2.20" (56 mm)
Depth: 2.01" (51 mm)
Weight (Approximate): 18.10 lb (8210.02 g)
Miscellaneous
Package Contents: Metered-by-Outlet Rack PDU CAN port terminatorInstallation guideRack mounting bracketsSafety guideSerial configuration cable
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 2 Year
Additional Warranty Information: 2 years repair or replace