ATS quality computers

General Information

---

Manufacturer: Eaton Corporation
Manufacturer Part Number: SMART1200XLHG
Brand Name: Tripp Lite series
Product Line: SmartPro
Product Name: SmartPro 1200XLHG UPS
Marketing Information: Tripp Lite's SMART1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load or 10 minutes for a full load, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output without drawing battery power. The SMART1200XLHG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise, while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both backup protection and surge protection rated to 940 joules. The SMART1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Ideal UPS Backup in Healthcare Facilities

• Complies with UL 60601-1 standards for use in patient-care facilities
• Isolation transformer with Faraday shield offers full isolation and removes common mode noise
• 6 ft. power cord with 120V NEMA 5-15P-HG plug
• Floating AC output prevents noise coupling and meets agency requirements for isolation

Reliable Battery Backup and Surge Protection

• Supports half load up to 28 min. and full load up to 10 min.
• 4 NEMA 5-15R-HG outlets with 940-joule surge protection
• Filters out disruptive EMI/RFI line noise that can cause equipment damage or data loss
• Resists electrostatic discharge

LEDs and Audible Alarms

• Front LEDs indicate power, mode, load and battery status
• Alarms alert you to power failure, overload and low battery
• Mute/quiet mode ideal for use in quiet patient-care vicinities

Saves Files When You're Away

• Included PowerAlert® software enables safe, unattended system shutdown and file saving during power failures
• Connects to computer via DB9 or USB port with included cables

More from the Manufacturer

Product Type: Line-interactive UPS

Technical Information

---

Plug/Connector Type: NEMA 5-15P
Receptacle Type: NEMA 5-15R
Receptacle Detail: 4 x NEMA 5-15R
Cord Length: 6 ft (1.83 m)
Transfer Time: 4 ms

Power Description

---

Load Capacity (VA): 1 kVA
Load Capacity (Watt): 750 W
Input Voltage: 120 V AC
Output Voltage:

115 V AC

120 V AC

Management

---

Network Management: SNMP Manageable
Alarm:

On Battery

Overload

Low Battery

Controls/Indicators

---

Status Indicators: Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning

Interfaces/Ports

---

USB: Yes

Battery Information

---

Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 10 Minute
Backup/Run Time (Half Load): 28 Minute
Battery Life: 6 Year
Hot Swappable: Yes
Typical Battery Recharge Time: 4 Hour

Environmental Conditions

---

Maximum Operating Temperature: 104°F (40°C)

Physical Characteristics

---

Height: 12.75" (323.85 mm)
Width: 7.50" (190.50 mm)
Depth: 9" (228.60 mm)
Form Factor: Tower
Weight (Approximate): 44.60 lb (20230.22 g)

Miscellaneous

---

Package Contents:

• SmartPro 1200XLHG UPS
• SMART 1200XLHG Medical Grade Tower UPS System
• PowerAlert Software and cabling
• Warranty information
• Instruction manual

Country of Origin: Taiwan

Warranty

---

Limited Warranty: 2 Year