Description:
General Information
Manufacturer: Eaton Corporation
Manufacturer Part Number: SMART1000RM1UN
Brand Name: Tripp Lite series
Product Line: SmartPro
Product Model: SMART1000RM1UN
Product Name: SmartPro SMART1000RM1UN 1kVA Rack-mountable
Marketing Information:
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
- Audible alarm signals loss of utility power, overload and low battery
- 6 NEMA 5-15R outlets
- 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
- 450-joule surge suppression rating
Reliable Battery Backup - Supports half load up to 14 min. and full load up to 4 min.
- Internal batteries designed for hot-swap field replacement
Pre-Installed WEBCARDLX Network Interface - Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.
- Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
Reduce Service Calls with Auto Probe Autonomous Device Management - Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA)
Switchable Outlets - 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
- Maintains 120V nominal output over input range of 83V-147V without using battery power
EMI/RFI Line Noise Filtering
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
LED Indicators
- Front-panel LEDs signal power, voltage correction, load level and battery charge state
Communications Ports
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert)
- EPO port supports emergency shutdown in large facilities
Versatile Installation Options
- Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
- Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
- Compatible with vertical mount cabinets
More from the Manufacturer
Product Type: Line-interactive UPS
Technical Information
Receptacle Type: NEMA 5-15R
Receptacle Detail: 6 x NEMA 5-15R
Power Description
Load Capacity (VA): 1 kVA
Load Capacity (Watt): 800 W
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Battery Information
Backup/Run Time (Full Load): 4 Minute
Physical Characteristics
Height: 1.70" (43.18 mm)
Width: 17.50" (444.50 mm)
Depth: 16.80" (426.72 mm)
Rack Height: 1U
Form Factor: Rack-mountable
Weight (Approximate): 32 lb (14514.96 g)
Miscellaneous
Package Contents:
- SmartPro SMART1000RM1UN 1kVA Rack-mountable
- Mounting Hardware
- Cabling for USB & DB9 Monitoring and EPO Switching
- PowerAlert Unattended Shutdown and UPS/Power Monitoring Software
- Instruction Manual
Country of Origin: Taiwan
TAA Compliant: Yes
Environmentally Friendly: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)
Warranty
Limited Warranty: 3 Year
0 items 
):
$1,891.95
